2006

Schmitz, T., Chu, D. and Houck III, L., 2006, First Order Periodic Error Correction: Validation for Constant and Non-constant Velocities with Variable Error Magnitudes, Measurement Science and Technology, 17: 3195-3203, http://iopscience.iop.org/0957-0233/17/12/001.

Schmitz, T. and Mann, B., 2006, Closed Form Solutions for Surface Location Error in Milling, International Journal of Machine Tools and Manufacture, 46: 1369-1377, http://dx.doi.org/10.1016/j.ijmachtools.2005.10.007.

Ziegert, J., Stanislaus, C., Schmitz, T., and Sterling, R., 2006, Enhanced Damping in Long Slender Endmills, Journal of Manufacturing Processes, 8/1: 39-47, http://dx.doi.org/10.1016/S1526-6125(06)70100-1.

Schmitz, T., Houck III, L., Chu, D., and Kalem, L., 2006, Bench-top Setup for Validation of Real Time, Digital Periodic Error Correction, Precision Engineering, 30: 306-313, http://dx.doi.org/10.1016/j.precisioneng.2005.10.001.

Schmitz, T. and Duncan, G.S., 2006, Receptance Coupling for Dynamics Prediction of Assemblies with Coincident Neutral Axes, Journal of Sound and Vibration, 289/4-5: 1045-1065, http://dx.doi.org/10.1016/j.jsv.2005.03.006.

Sawyer, W.G., Ziegert, J., Schmitz, T., and Barton, T., 2006, In-Situ Lubrication with Boric Acid: Powder Delivery of an Environmentally Benign Solid Lubricant, Tribology Transactions, 49: 284-290, http://www.tandfonline.com/doi/abs/10.1080/05698190600639939.

2005

Schmitz, T. and Duncan, G.S., 2005, Three-Component Receptance Coupling Substructure Analysis for Tool Point Dynamics Prediction, Journal of Manufacturing Science and Engineering, 127/4: 781-790, http://dx.doi.org/10.1115/1.2039102.

Davies, A. and Schmitz, T., 2005, Correcting for Stage Error Motions in Radius Measurements, Applied Optics, 44/28: 5884-5893, http://dx.doi.org/10.1364/AO.44.005884.

Schmitz, T., Action, J., Ziegert, J., and Sawyer, W.G., 2005, The Difficulty of Measuring Low Friction: Uncertainty Analysis for Friction Coefficient Measurements, Journal of Tribology, 127: 673-678, http://dx.doi.org/10.1115/1.1843853.

Duncan, G.S., Tummond, M., and Schmitz, T., 2005, An Investigation of the Dynamic Absorber Effect in High-Speed Machining, International Journal of Machine Tools and Manufacture, 45: 497-507, http://dx.doi.org/10.1016/j.ijmachtools.2004.09.005.

Mann, B., Young, K., Schmitz, T., and Dilley, D., 2005, Simultaneous Stability and Surface Location Error Predictions in Milling, Journal of Manufacturing Science and Engineering, 127: 446-453, http://dx.doi.org/10.1115/1.1948394.

2004

Schmitz, T., Ziegert, J., Burns, T., Dutterer, B., and Winfough, W., 2004, Tool-Length Dependent Stability Surfaces, Machining Science and Technology, 8/3: 377-397, http://www.tandfonline.com/doi/abs/10.1081/MST-200038989.

Schmitz, T., Action, J., Burris, D., Ziegert, J., Sawyer, W.G., 2004, Wear Rate Uncertainty Analysis, Journal of Tribology, 126: 802-808 (2004 Best Paper Award), http://dx.doi.org/10.1115/1.1792675.

Schmitz, T., Dagata, J., Dutterer, B., and Sawyer, W., 2004, A Multi-Scale Fabrication Approach to Microfluidic System Development, Journal of Manufacturing Processes, 6/1: 88-96.

Schmitz, T., Action, J., Burris, D., Ziegert, J., Sawyer, W., 2004, Measurement Uncertainty in Tribological Wear Rate Testing, SME Technical Paper TP04PUB183, Transactions of NAMRI/SME, 32: 343-350.

Schmitz, T., Ziegert, J., and Stanislaus, C., 2004, A Method for Predicting Chatter Stability for Systems with Speed-Dependent Spindle Dynamics, SME Technical Paper TP04PUB182, Transactions of NAMRI/SME, 32: 17-24.

2003

Davies, M., Yoon, H., Schmitz, T., Burns, T., and Kennedy, M., 2003, Calibrated High Resolution Thermal Microscopy of the Tool-Chip Interface in Machining, Machining Science and Technology, 7: 167-190, http://www.tandfonline.com/doi/abs/10.1081/MST-120022776.

Schmitz, T., Davies, A., Evans, C., and Parks, R., 2003, Silicon Wafer Thickness Variation Measurements using the NIST Infrared Interferometer, Optical Engineering, 42/8: 2281-2290.

Schmitz, T., 2003, Chatter Recognition by a Statistical Evaluation of the Synchronously Sampled Audio Signal, Journal of Sound and Vibration, 262/3: 721-730.

2002

Schmitz, T., 2002, Automatic Trimming of Machining Stability Lobes, International Journal of Machine Tools and Manufacture, 42: 1479-1486, http://dx.doi.org/10.1016/S0890-6955(02)00034-2.

Schmitz, T., Medicus, K., and Dutterer, B., 2002, Exploring Once-per-revolution Audio Signal Variance as a Chatter Indicator, Machining Science and Technology, 6/2: 215-233, http://www.tandfonline.com/doi/abs/10.1081/MST-120005957.

Schmitz, T. and Beckwith, J., 2002, An Investigation of Two Unexplored Periodic Error Sources in Differential-Path Interferometry, Precision Engineering, 27/3: 311-322, http://dx.doi.org/10.1016/S0141-6359(03)00036-9.

Schmitz, T. and Beckwith, J., 2002, Acousto-optic Displacement-Measuring Interferometer: A New Heterodyne Interferometer with Angstrom-Level Periodic Error, Journal of Modern Optics, 49/13: 2105-2114, http://www.tandfonline.com/doi/abs/10.1080/09500340210123938.

Schmitz, T., Evans, C., Davies, A., and Estler, W.T., 2002, Uncertainty in Interferometric Radius Measurements, Displacement Uncertainty in lnterferometric Radius Measurements, Annals of the CIRP, 51/1: 451-454, http://dx.doi.org/10.1016/S0007-8506(07)61558-3.

2001

Schmitz, T., Davies, M., and Kennedy, M., 2001, Tool Point Frequency Response Prediction for High-Speed Machining by RCSA, Journal of Manufacturing Science and Engineering, 123: 700-707, http://dx.doi.org/10.1115/1.1392994.

Schmitz, T., Davies, M., Medicus, K., and Snyder, J., 2001, Improving High-Speed Machining Material Removal Rates by Rapid Dynamic Analysis, Annals of the CIRP, 50/1: 263-268, http://dx.doi.org/10.1016/S0007-8506(07)62119-2.

Schmitz, T., Davies, M., Dutterer, B., and Ziegert, J., 2001, The Application of High-Speed CNC Machining to Prototype Production, International Journal of Machine Tools and Manufacture, 41: 1209-1228, http://dx.doi.org/10.1016/S0890-6955(01)00005-0.

2000

Schmitz, T. and Donaldson, R., 2000, Predicting High-Speed Machining Dynamics by Substructure Analysis, Annals of the CIRP, 49/1: 303-308, http://dx.doi.org/10.1016/S0007-8506(07)62951-5.

Schmitz, T. and Ziegert, J., 2000, Dynamic Evaluation of Spatial CNC Contouring Accuracy, Precision Engineering, 24/2: 99-118, http://dx.doi.org/10.1016/S0141-6359(99)00034-3.

1999

Schmitz, T. and Ziegert, J., 1999, Examination of Surface Location Error Due to Phasing of Cutter Vibrations, Precision Engineering, 23/1: 51-62, http://dx.doi.org/10.1016/S0141-6359(98)00025-7.

Schmitz, T. and Ziegert, J., 1999, A New Sensor for the Micrometer-Level Measurement of 3-D, Dynamic Contours, Measurement Science and Technology, 10/2: 51-62 (1999 Highly Commended Article), http://iopscience.iop.org/0957-0233/10/2/001.

1998

Schmitz, T. and Ziegert, J., 1998, Premachining CNC Contour Validation, Precision Engineering, 22/1: 10-18, http://dx.doi.org/10.1016/S0141-6359(97)00086-X.